General description:

1. As part of the entrance door marking system, we use three key elements:

• Informative indigo banner – serves to inform about working hours and at the same time draws attention to the glass surface
• Sticker with notices, prohibitions, branch address
• Security sticker
  
  2. When the solution using a sticker on the entrance door is not possible, an information signboard with all information should be placed next to the door.
  
  3. Marking Zone 24/7 is not mandatory. The use depends on the requirements of the individual market.

Materials and technical description:

1. Indigo blue banner, 11 cm high, which is always placed on the entrance door of branch offices.
2. The sticker with notices, prohibitions and the title is made of sandblasted foil and protected with matte UV lamination. The sticker is printed on one side and glued to the outside of the door.
   
3. The Security sticker is made of transparent foil and protected with gloss UV lamination. The sticker is printed on one side and glued to the outside of the door.
   
4. Information board made of lacquered aluminium sheets in the colour RAL Design 290 20 35, with a white translucent acrylic filler. The information on the board is written in film. The board is lighted with integrated LED strips arranged along the entire longitudinal surface. The primary board size used is 45 cm wide and 68 cm high. On sites where due to the damage from the previously removed board the façade does not permit a width of 45 cm, a board of 50 cm width is used. The height remains unchanged.

Installation:

1. The banner is installed at 140 cm (upper edge). The banner can continue from the door to the display windows if the building type permits and there is no space for other elements on the glass surfaces (communication messages, sign, symbol).
   
2. The sign Pull / Push is always located next to the handle on the front door.
   On the right or left side of the doorknob are the inscriptions Welcome and after that the opening hours of the branch (the end of the banner). On the right or left of the Working hours, a sticker for card business is placed independently.
   The sticker with notices, prohibitions, the address of the branch and the Security sticker are always placed on the upper left or right edge of the door. If the door does not allow the recommended positions, the positions of the inscriptions are determined individually.
3. The info board is placed in the position where the old Spandex info board was removed in the past.

Entrance door banner - outside

Entrance door banner - inside

Display of info banner elements

Display of a sticker with warnings, prohibitions and the address of the branch

Sample drawings:

Placement example: Entrance door - single

Placement example: Entrance door - double

Placement example: Automatic entrance door – larger glass surfaces

Placement example: Entrance door – info board

Placement example: Entrance door to Zone 24/7

Video surveillance and security area

Notices about video surveillance and security are affixed independently in the areas where video surveillance and security of the facility is implemented. The notice must be visible before the person enters the area.