General description:
The signboard is used as an additional signage element to increase the visibility of the branch bank or ATM from different sides of the building. 
Due to limited space, only the NLB symbol (without the member's name) is always used on the signboard.

It is used to mark the branch when, due to the architecture of the building, placing the symbol above the entrance door or on the facade is not possible.

Signboard is also used as signage for a branch or ATM on buildings that are part of cultural heritage, where other signage elements are not allowed to use. 

Our signage includes two signboard types:

1. NLB signboard:

Used as signage for a branch bank when the architecture of the building does not permit to place a symbol above the entrance door or on the façade.

Used as an additional signage element to increase the visibility of the branch bank from different sides.

2. NLB ATM signboard:
Used to increase the visibility of ATM sites.
The word ATM is written out in the local language.

Materials and technical description:
The signboard is made of aluminium sheet in the colour RAL Design 290 20 35 with a border of white translucent acrylic and lighted with LED elements.
Both are made in dimensions: height: 45 cm, width: 70 cm.

Installation:
The signboard is installed on the building above the ground floor. 
It can be attached to the building in one of the following ways: 

• With the side directly to the façade.
• With the upper side directly fixed to the ceiling (when fixing it under projecting roofs, arcades, outer passages and similar).
• As the end of the light banner when the light banner element is used to mark the branch bank.

Only one signboard may be placed on each side of the building; several signboards may be placed only on very long façades (more than 10 m). The distance between individual signboards should be at least 10 m.

Marking of buildings that are part of cultural heritage

On façades that are part of cultural heritage we may only installed the signboards with the NLB symbol and the ATM sign. In this case, it is recommended to placed NLB symbol or the symbol of a member on the glass surfaces. The positions of individual elements on the facades are defined individually.

Sample drawings